Laminating Machine/Automatic Feeding and Discharging Equipment

Product Description:

After finishing, the cleaing and drying machine clean the plate with the water and dry the plate out of the drops and steam.

Then it was transmitted by the roller, to cover the film by automatic laminating machine, laminating by manual,

But if you have been adjusted the procedure of the laminating, then the step will be automatically.

Finally, the plate will be transmited to the appointed position, and will be sucked by the automatic vacuum plate to un-feeding position.

Product Technology Advantage Description:
1) The automatic laminating machine

2) The machine is highly mechanized; it could adjust the board position and cut the sheet automatically, so we could save the labor of two workers.

3) This machine use servo motor, it is extreme accurate, it can save a large amount of plastic film since the distance between two sheet is totally zero.

4) For the laminating film, it adjust the film to cover the surface by the handle, it also make the film on the right position, then the more bargain of film could be diverged by the electric eye.

5) The laminating roller rotate the speed, then the machine could be drive the rotating and upper by the cylinder.

6) And for the other situaction, if the style of the plate is coil to coil, then the laminating the part will be mixed with the tension table.

7) In order to keep the coil cover the film smoothly, the tension table will pull the plate stringly, it could collect the plate without any wistle of the plate and without the room of the plate.